Some questions you may have about custom fit clubs........

Click the boxes on the left to check out our custom clubs!

Frequently Asked Custom Golf Club Questions

Q. Why buy custom made clubs rather than brand name clubs or
    clubs off the shelf?

When you buy clubs off the shelf at various sporting good stores do they.......

a.    Complete a computer analysis to ensure the clubs fit your swing speed, attack and lie angles?

b.    Check to see if all shafts in the set are frequency  matched? If the shaft is listed as a regular flexed
        shaft how do you know it really is? 

c.    Do they measure you in the store to make sure the clubs are the right length for you?

d.     Do they measure your hand to make sure the right amount  of grip tape is placed under the grip?

e.    Do they let you try the clubs to make sure you are making solid contact and can they bend the clubs
        so you will be able to make solid contact?

f.    Do they measure you swing speed to see what type of  stiffness you clubs need to be?

If you have bought a set of clubs from places that sell "off the shelf", or brand name clubs chances are you would have answered NO to all of the questions listed above. 
 

At Mulligans Golf our customized clubs.......

a.   As of January 1st 2007, we now have the ability to complete an computer analysis on your golf swing
      which ensures the clubs we will be making fit YOU based on YOUR specifications. To learn more about
      our new fitting procedure click here!

b.    All shafts in a set of clubs made by Mulligans Golf are frequency matched.  A frequency analyzer is
        used to make certain all shafts are the same flex.  This is critical to  ensure there is a consistent distance
        between each club  in your bag.  Each club should have a distance gap of approximately ten yards. 
        For example if you hit your seven iron 150 yards you should be able to hit your six iron 160 yards. 
        This is ensured with frequency matching.  This service is provided free of charge when a set of
        clubs is purchased at Mulligans Golf.

c.    A special measuring device is used to ensure clubs are measured to the appropriate length to
        fit you.   Clubs off  the shelf do not fit everyone.  This service is provided free of charge when a
        set of clubs is purchased at Mulligans Golf.

d.    A special measuring device is used to ensure the proper amount of grip tape is applied under
        the grip. This service is provided free of charge when a set of clubs is purchased at Mulligans
        Golf.

e.    Demo clubs are available to try, if you purchase a set of clubs the lie can be adjusted to ensure
        solid contact on the middle of the club face.  This service is provided free of charge when a
        set of clubs is purchased at Mulligans Golf.

f.     One of the most critical areas of custom club fitting, your swing will be measured with a fitting
        device to ensure the  proper flex shaft are used in your set of irons.   If the flex of the shaft is too stiff
        or too flexible, you will lose distance and control of the ball when it leaves the club face.  This
        service is provided free of charge when a set of clubs is purchased at Mulligans Golf.

Q.  Does it cost anything to be fit for Custom Clubs?

 

When purchasing a set of irons and/or woods, clients are custom fit prior to actually buying clubs.  Consumer that wish to be measured will be charged a flat rate fee of $25.00 during initial visit (computerized simulated fitting included). 

         The reason I've applied this charge is that clients previously would come  to me for  fittings then
        purchase clubs from other Clubmakers or shops after the initial visit.

         If the client purchases a set of clubs through Mulligans Golf, a twenty  dollar  discount will be given
        on the price of the clubs.

Q. What is Mulligans Golf?

Mulligans Golf is a custom  golf club making and fitting business located in Lethbridge Alberta.  Mulligans has been in operation for close to ten years.   The proprietor is a certified GCA clubmaker with Golfsmith International.

Q. What is your industry background?

I am a certified clubmaker, a member of the Golf Clubmakers  Association.  I have close to ten years industry experience and have completed club repairs for Vauxhall Golf & Country  Club, Nevada Bobs and am currently providing club repair services for Magrath Golf course, Sports Chek in Lethbridge and Nevada Bobs.

Q.  What brand of components do you sell?

Mulligans Golf uses products sold by Golfsmith International.  They have site in Toronto ON and the parent site is located in Austin Texas.

Q.  How do I know if I will like the clubs?  Can I try  them out?  

Demo clubs are available  to residents in Lethbridge and the outlying area. All you have to do is make an appointment and  we will bring the demo's to you or you can come by and pick them to try them out.  In order to try the demo clubs, you will have to leave an imprint of your visa or master card.

Q.  What type of guarantee do you have on your clubs?

The clubs are guaranteed for life, based on normal use.

To view clubs once again, click here.

[ Home ] [ Up ]

Ready to place an order?

Use our shopping cart    or phone us!

Please note all prices on this site are in Canadian Dollars!
To see what it would cost in American or other currencies, click here!

Phone Toll Free 1- 800-851-0061 Local Cell  (Lethbridge) 892- 4653
Please note a minimum order of $15.00 is necessary to have an order processed.

Place phone orders between 7:00 am to 8:00 pm Mountain Time - Seven days a week!

Send mail to  admin@mulligansgolf.ca with questions or comments about this web site.
Copyright © 1999 Mulligans Golf. All rights reserved.